Updates on our products and our company

Please find below overview of our blogs, events and other updates. If you are interested in our Technical Insights, please check out our technical blog.

Explanatory drawing of Harbil 300 ml piston pump

3 December 2019 Written by: Margriet van Dijk

New canister and stirrer design

3 December 2019 Written by: Margriet van Dijk

Firmware version 2.06.4 available for HA480 and HA680 dispensers

11 November 2019 Written by: Margriet van Dijk

Ever wondered how your dispenser, shaker or mixer is built?

11 November 2019 Written by: Margriet van Dijk

TM300 dispenser phase out

3 October 2019 Written by: Product Management

After years of trusted service, we have decided to phase out production of the TM300 dispenser by December 31, 2019.

SK350 improvements

2 September 2019 Written by: Margriet van Dijk

For many of our customers, the SK350 has been their reliable shaker since 2007. And for us at FFM it’s been a great commercial success too, with …

No more mistints with new AutoDrive on X-PROTINT

18 June 2019 Written by: Product Management

The release of firmware version 2.04.9 on the X-PROTINT marks the introduction of the AutoDrive. All X-PROTINT's, delivered from week 17 onwards, …

Designing, developing and producing a dispenser. Do you know How it's Done?

17 June 2019 Written by: Marketing Communications

You might have seen them on Dutch TV, the short company videos that explain “How it’s Done”. The editors of this TV program travel the country in …

Technical Insights (May 2019)

10 June 2019 Written by: Product Management

In this Technical Insights, you can read about firmware updates for the GA480 and X-PROTINT (the latter now with AutoDrive technology), the …

ECS 2019 Review

16 May 2019 Written by: Product Management

We look back with pride at another successful European Coatings Show. It's special to spend three days together with an entire team and to have …

Harbil Next Gen Insights No 4

14 January 2019 Written by: Product Management

The Harbil Next Gen platform is in constant motion, always looking for ways to make life easier for you and your operators.

New software release available on MyFastFluid.

17 September 2018 Written by: Gijs Heukelom

Do you want to stay up to date on the latest software changes at Fast & Fluid?

Harbil Next Gen Insights No 3

4 June 2018 Written by: Product Management

Meet the latest addition to the Harbil Next Gen platform: the HA680! After extensive development and testing in the field, it has now been …

Fast & Fluid presents X-PROTINT at MECS Dubai

6 May 2018

Fast & Fluid presented the new X-PROTINT dispenser at the Middle East Coatings Show in Dubai last March.

Harbil Next Gen Insights no.2

29 January 2018 Written by: Product Management

When we started developing the Harbil Next Gen platform back in 2012, sustainability wasn’t our top priority. Our aim was to develop a dispenser …

Harbil Next Gen Insights No 1

31 October 2017 Written by: Product Management

After years of research and testing, we were ready to launch the first dispenser of the Harbil Next Gen platform, the HA480, at this year’s ECS in …

How good is the GA480?

17 January 2017 Written by: Margriet van Dijk

The launch of the GA480 mixer in 2016 has been a great success. Now, six months on, we want to hear what our customers think of the machine’s …

How the GA480 came to life

17 June 2016 Written by: Margriet van Dijk

We spoke to Jan Post, Vice President Research International at Fast & Fluid Management, and wanted to learn more about the development of the GA480 …

Mix 2 the max with the GA480

18 May 2016 Written by: Margriet van Dijk

Faster and smarter. Two fundamental words describing Fast & Fluid’s revolutionary new GA480 automatic mixer. The clever auto button does all the …

Fast & Fluid ISO 9001-2015 certified

2 February 2016 Written by: Product Management

ISO 9001 is one of ISO’s most well-known standards, with more than 1.1 million certificates worldwide. It provides requirements to help companies …

Thirty years of tinting solutions

13 January 2016 Written by: Sue Tyler, PPCJ

Sue Tyler visited Fast & Fluid in Sassenheim, to find out how the company has become such a major influence in the global tinting sector.

Reddot award for X-SMART

12 April 2014 Written by: Merijn van Domburgh

We’re very proud of our design, which is why we entered the X-SMART in the 2014 Red Dot Design Award. These prestigious international awards have …

X-SMART convinces Einza

2 June 2013 Written by: Merijn van Domburgh

einzA is the first company to introduce X-Smart, Fast & Fluid’s new entry level dispenser, to the market in Germany. We are proud of the fact einzA …