At Fast & Fluid, we always want to keep you informed on the latest technical developments. In our Technical Insights newsletters you will find useful product updates.

Show all technical blogs

Technical blogs for X-PROTINT® Automatic paint dispenser

New board V2 X-PROTINT

08 November 2021  - Written by:

New printed circuit board for X-PROTINT dispenser

Technical Insights (May/June 2021)

07 June 2021  - Written by: Product Management

In this issue of Technical Insights, we have the latest updates for you on our Harbil Series, X-PROTINT dispensers and the GA480 mixer. In addition we want to share some recommendations for a safe working...

Always wanted to know what your dispenser has been up to? Now you can!

10 November 2020  - Written by:

The latest release of Drivers & Tools gives you even more control over your dispenser.

Technical Insights (February 2020)

19 March 2020  - Written by: Product Management

We want to give our technicians practical tools that will help them replace and maintain parts that power our tinting machines. One way of doing this is through our handy service videos. Or through informative...

New canister and stirrer design

03 December 2019  - Written by:

We all know those colorants that give trouble over time when they are inside a canister for too long.

Technical Insights (September 2019)

03 October 2019  - Written by: Product Management

In this issue of Technical Insights, we have news for you on the X-PROTINT, SK350 updates, the final year for theTM300, new firmware releases for Harbil dispensers, the GA350/480 and SK550 1.1, and more.

No more mistints with new AutoDrive on X-PROTINT

18 June 2019  - Written by: Product Management

The release of firmware version 2.04.9 on the X-PROTINT marks the introduction of the AutoDrive. All X-PROTINT's, delivered from week 17 onwards, will feature the AutoDrive for ultimate dispense speed and prevents mistints showing ‘stepper...

Heating kit for X-PROTINT

07 May 2019  - Written by:

Colorant conditioning is vital to keep your machine running flawlessly.

Cross hair in can table X-PROTINT

07 May 2019  - Written by:

The crosshair in your X-PROTINT is now laser cut.

Technical Insights (January 2019)

01 April 2019  - Written by: Product Management

Read in this newsletter why we adjusted the can table of the X-PROTINT, changed the stepper motor in the X-PROTINT and X-SMART for all the right reasons and made various enhancements to the GA480 mixer...

Technical Insights (December 2018)

08 January 2019  - Written by: Product Management

To help you prepare for 2019, new firmware releases are available for the X-PROTINT and HA480-680 dispensers, and for the SK550 1.1 shaker.

Technical Insights (November 2018)

20 November 2018  - Written by: Product Management

This edition of Technical Insights is entirely dedicated to dispensers.

Technical Insights (July 2018)

10 July 2018  - Written by: Product Management

In this issue of Technical Insights, we’ll give you the latest updates on the HA480, HA680 and X-PROTINT dispensers, the SK350 shaker and a new EAC certification for all machines.

Technical Insights (May 2018)

28 May 2018  - Written by: Product Management

In this issue, you can read about the latest technical updates on the GA350 and GA480 mixers, the SK550 1.1 shaker, and the X-PROTINT and HA480 dispensers.