HA480 Automatic paint dispenser - Dispensers
- High-quality design
- Harbil® ZeroPurge™ Piston pump
- Fast and reliable
The HA480 automatic dispenser is the new standard in tinting. It is the ideal solution for DIY, medium-sized retail or service centers. The improved dispense speed, ZeroPurge™ piston pump and AutoDrive™ technology ensure future-proof efficiency and reliability for your business operation.
Specifications
- 16-32 POM/SST canisters in 2/3/6/10 l size
- ZeroPurge piston pump technology
- Universal, solvent, water based and biocide-free colorants
- Pump size: 100 ml
- Flow rate 0.8 – 1.0 l/min
- 0,05 ml smallest dispense
- Electric can table
- Electric punch (optional)
- Heating set (optional)
- Low/high model
- HWD 151x88x96 cm (low model)
- HWD 171x88x96 cm (high model)
For all product Insights and updates please visit:
harbilnextgen.com
Request information about the HA480 Automatic paint dispenser
A Harbil Series dispenser
The Harbil Series dispensers take tinting to the next level. Featuring innovative technology based on customer collaboration and years of development, you can be sure of superior dispensing results, even with the most challenging colorants.
Read more on harbilnextgen.com
The Harbil® ZeroPurge™ Piston Pump
Optimize your operation with the ZeroPurge piston pump. This pump eliminates the manual purging process and autonomously flushes the dispense channels at night, leaving no room for idle colorant anywhere in the system.
Zero colorant waste, minimal maintenance, and a dispenser that’s always ready.
Watch the video to see more.
Technical data
General
- Automatic sequential
Solvent based, water based, universal and biocide-free colorants
Canisters
- Up to 16 - 32 canisters
- Material: polymeric/stainless steel (optional)
- Sizes: 2/3/6/10 l
Pump
- Harbil® ZeroPurge™ Piston pump
- Pump size: 100 ml
- Flow rate: 0.8 - 1.0 l/min
- Min. dispense: 0.05 ml
- Nozzle diameter: 2/4/6 mm
- Stainless steel ball valve
- Seals material: Teflon / Viton extreme / Viton
- ZeroPurge™
- Copied calibration - no recalibration required
Nozzles
- Air tight - integrated nozzle closures
- Cleaning system: automatic brush & internal flush
Can table
- Electric Lift
- Dimensions: 44 x 31 cm
- Loading height: 39 cm (low model) / 55 cm (high model)
- Max. can height: 42 cm (low model) / 46 cm (high model)
- Optical can sensor / Short Range sensor (optional)
Dimension & weight
- HWD 151 x 88 x 96 cm (Low model)
HWD 171 x 88 x 96 cm (High model) - Filling height:
140 cm (Low model)
112 cm from step (Low model)
160 cm (High model)
132 cm from step (High model) - Packaging dimensions: 193 x 98 x 117 cm
- Weight - Net/Gross 193-265 / 224-296 kg
Power supply & safety
- 110V +/- 10%, 50Hz/60Hz
230V +/- 10%, 50Hz/60Hz - CE certified, UL approved
Brush
- Material: polymeric / Stainless steel (optional)
Optional
- different colours (RAL).
Options and Accessories
Options
Brush monitor
Brush monitor
A system that monitors the brush liquid level and gives the operator a warning (brush icon starts blinking) when the container is almost empty.
This item is not available for a HA180, optional for HA480 and standard for a HA680.
Brush monitor
Can positioning light HA
Can positioning light HA
The can positioning light shows the operator were the middle of the can shelf is, in order to place a can straight underneath the dispensing point of the machine.
If you are purchasing a new Harbil Series dispenser, you can order the CPL as an optional accessory. You can retrofit your current generation Harbil design by ordering a retrofit kit.
Read more in our blog: https://emea.fast-fluid.com/news/can-positioning-light/
Can positioning light HA
Harbil Automation
Harbil Automation
Our Harbil Automation is a new option on our HA180, HA480 and HA680, allowing our dispensers to be integrated into an automatic tinting line.
This option is ideal for large batches that are too large for a standalone dispenser or too small for an in-plant tinting system.
- High output - up to 50 buckets per hour
- Get the most out of your HA480 or HA680
- Save on labor
- Affordable solution
Harbil Automation
Heating set
Heating set
Integrated heating device that can be placed on the inside of a dispenser, to heaten up the temperature in order to keep your colorants in good condition.
Heating set
Punch 46 mm
Punch 46 mm
The integrated punching system, in order to punch a hole of 46 mm into the lid of the can after which a dispense can start.
Punch 46 mm
Sample dispensing
Sample dispensing
This option contains a sophisticated wet & dry brush system to keep the nozzle in optimal condition, key for dispensing very small amounts.
For reasonable speed (up to 0,5L/m) and accuracy, we offer the 55 ml ZeroPurge piston pump with a minimum dispense of 0.025 ml*.
* Depending on your colorant system used.
Read our blogs about sample dispensing for more details: https://emea.fast-fluid.com/news/speed-accuracy-and-precision-are-essential-in-sample-tinting/
or The difference between POS and LAB sample tinting - Fast & Fluid EMEA (fast-fluid.com)
Sample dispensing
Spray
Spray
Our Spray solution, optional in HA180 and HA480, has been specifically designed to protect vulnerable biocide-free colorant systems of up to 24 colorants. Applied using our unique spraying canister lids, the Spray liquid disinfects the headspace of the canisters, providing thorough protection. Additionally, our programmable Spray system allows you to tailor the interval and duration of the Spray. This optimizes the conditioning of your colorants, ensuring they remain vibrant and healthy for longer.
Spray
UVC Solutions
UVC Solutions
Protect your colorants against mold and bacteria with our cutting-edge UVC Solutions, compatible on our HA180, HA480 and HA680.
- Consistent Protection
- Automatic head space conditioning for up to 24 canisters
- User-friendly
- Fully programmable system for effortless control.
- Advanced mold protection
- Unique UVC light-emitting lids inhibit mold and bacterial growth
- Enhanced Colorant Longevity
- Optimal UNVC distribution ensuring the colorants remain vibrant and uncontaminated
UVC Solutions
Ventilated back cover
Ventilated back cover
The ventilated back cover continuously ventilates the inside of the machine, to prevent a build-up of potentially explosive fumes in case of leakage or spillage.
Ventilated back cover
Accessories
Basket for punch caps
Basket for punch caps
A special storage tray for caps to close the lids after punching and dispensing.
Basket for punch caps
Can table adapter with rollers
Can table adapter with rollers
Extends your roller conveyor onto the can table of the dispenser.
Can table adapter with rollers
Large can table plate
Large can table plate
Enlarged can table of 408 mm depth x 436 mm width (standard 310 x 436 mm) for bigger and/or square cans.
Large can table plate
Loading ramp
Loading ramp
Handy wooden ramp you can fix to the pallet for easier (un)loading of the dispenser.
Monitor keyboard arm
Monitor keyboard arm
A bracket that can be mounted on both sides of the dispenser. The bracket can support different kind of pheriphiral equipment like a monitor, mouse, keyboard and a compact printer.
Monitor keyboard arm
Monitor keyboard arm XL
Monitor keyboard arm XL
A bracket that can be mounted on both sides of the dispenser. The bracket can support different kinds of peripheral equipment like a monitor, mouse, keyboard and a compact printer. This is an enlarged bracket for higher printers of 80 instead of 60 mm.
Monitor keyboard arm XL
Roller conveyor
Roller conveyor
Ergonomic solution for heavy cans. Position the roller conveyer in line with the can table to load or unload cans.
Roller conveyor
Satellite overhang stand
Satellite overhang stand
The side table used to set up over a shaker offering space for a monitor, keyboard, mouse, printer and other peripherals.
Satellite overhang stand
Stand alone punch 46mm or 48mm
Stand alone punch 46mm or 48mm
An external punching system in order to punch a hole into the lid of the can to be able to dispense through the punched hole. The stand alone punch is available in 2 different punch knife sizes of 46 or 48 mm.
Stand alone punch 46mm or 48mm
Touchscreen arm
Touchscreen arm
To mount a touchscreen on the dispenser.
Touchscreen arm
Ventilation interface adapter
Ventilation interface adapter
The adaptor allows you to connect all Harbil and X-PROTINT dispensers produced as from mid-2020 to an external air extraction system.
It can be fit into the ‘push-out hole’ of the machine’s rear panel.
For more information read our blog .
Ventilation interface adapter
Downloads related to this product
Technical Insights
Technical Insights (December 2021)
To answer the supply chain challenges caused by COVID-19 constraints and component shortages, our engineers and developers have been looking for – and finding – alternative ways to improve our tinting machines. Read about our...
Technical Insights (May/June 2021)
In this issue of Technical Insights, we have the latest updates for you on our Harbil Series, X-PROTINT dispensers and the GA480 mixer. In addition we want to share some recommendations for a safe working...
Complementary
SK550 1.1 heavy-duty paint shaker
- Medium and high volume paint turnover
- High/Low clamping detection
- Max. product weight: 40kg
- Speed: up to 680 shakes per minute - variable speed (slow start); contact us for optimal settings
PrismaPro2 POS tinting software
Control all aspects of your POS tinting software with PrismaPro. It's compatible with all our automatic dispensers. Fueled by 15 years of customer insights Prisma Pro has grown to be an outstanding solution for demanding operators and engineers.
GA480 automatic mixer
- Medium and high volume paint turnover
- Automatic, dedicated control
- Max. product weight: 40kg
- Variable speed (slow start), between 230 and 100 rpm, dynamic balance