Back to Products

HA480 Automatic paint dispenser - Dispensers

  • High-quality design
  • Harbil® ZeroPurge™ Piston pump
  • Fast and reliable

The HA480 automatic dispenser is the new standard in tinting. It is the ideal solution for DIY, medium-sized retail or service centers. The improved dispense speed, ZeroPurge™ piston pump and AutoDrive™ technology ensure future-proof efficiency and reliability for your business operation.

Specifications

  • 16-32 POM/SST canisters in 2/3/6/10 l size
  • ZeroPurge piston pump technology
  • Universal, solvent and water based colorants
  • Pump size: 100 ml
  • Flow rate 0.8 – 1.0 l/min
  • 0,05 ml smallest dispense
  • Electric can table
  • Electric punch (optional)
  • Heating set (optional)
  • Low/high model
  • HWD 151x88x96 cm (low model)
  • HWD 171x88x96 cm (high model)

For all product Insights and updates please visit:
harbilnextgen.com

Request information about the HA480 Automatic paint dispenser

A Harbil Next Gen Series dispenser

The Harbil Next Gen Series takes tinting to the next level. Featuring innovative technology based on customer collaboration and years of development, you can be sure of superior dispensing results, even with the most challenging colorants.

Read more on harbilnextgen.com

The Harbil® ZeroPurge™ Piston Pump

Optimize your operation with the ZeroPurge piston pump. This pump eliminates the manual purging process and autonomously flushes the dispense channels at night, leaving no room for idle colorant anywhere in the system.

Zero colorant waste, minimal maintenance, and a dispenser that’s always ready.

Watch the video to see more.

Technical data

General

  • Automatic sequential
    Solvent based, water based, universal

Canisters

  • Up to 16 - 32 canisters
  • Material: polymeric/stainless steel (optional)
  • Sizes: 2/3/6/10 l

Pump

  • Harbil® ZeroPurge™ Piston pump
  • Pump size: 100 ml
  • Flow rate: 0.8 - 1.0 l/min
  • Min. dispense: 0.05 ml
  • Nozzle diameter: 2/4/6 mm
  • Stainless steel ball valve
  • Seals material: Teflon / Viton extreme / Viton
  • ZeroPurge™
  • Copied calibration - no recalibration required

Nozzles

  • Air tight - integrated nozzle closures
  • Cleaning system: automatic brush & internal flush

Can table

  • Electric Lift
  • Dimensions: 44 x 31 cm
  • Loading height: 39 cm (low model) / 55 cm (high model)
  • Max. can height: 42 cm (low model) / 46 cm (high model)
  • Optical can sensor

Dimension & weight

  • HWD 151 x 88 x 96 cm (Low model)
    HWD 171 x 88 x 96 cm (High model)
  • Filling height:
    140 cm (Low model)
    112 cm from step (Low model)
    160 cm (High model)
    132 cm from step (High model)
  • Packaging dimensions: 193 x 98 x 117 cm
  • Weight - Net/Gross 193-265 / 224-296 kg

Power supply & safety

  • 110V +/- 10%, 50Hz/60Hz
    230V +/- 10%, 50Hz/60Hz
  • CE certified, UL approved

Options

  • Electric punch 46 mm, heating set, rollerbed on can table, large can table plate, different colours (RAL).

Options and Accessories

When you order options or accessories, they both allow you to personalize your machine to your specifications. Options are factory-installed features and you will find them built into your machine when it arrives. Accessories are supplied separately and have to be mounted during or after the installation. Below find the list of available options & accessories for the HA480.

Options

Brush monitor

Brush monitor

A system that monitors the brush liquid level and gives the operator a warning when the container is almost empty.

Can positioning light

Can positioning light

The can positioning light shows the operator where the middle of the can shelf is, in order to place a can straight underneath the dispensing point of the machine.

Heating set

Heating set

A stand-alone heating device that can be placed on the inside of a dispenser.

Punch 46 mm

Punch 46 mm

The punch forces a hole into the lid of the can after which a dispense can start.

Sample dispensing

Sample dispensing

Making your dispenser even more accurate.

Ventilated back cover

Ventilated back cover

The ventilated back cover continuously ventilates the inside of the machine to prevent a build-up of potentially explosive fumes in case of leakage or spillage.

Accessories

Basket for punch caps

Basket for punch caps

Special tray in which the caps that are used after punching can be placed.

Can table adapter with rollers

Can table adapter with rollers

Adapter to extend your roller conveyor onto the can table of the dispenser

Large can table plate

Loading ramp

Loading ramp

Handy wooden ramp you can fix to the pallet for easier (un)loading of the dispenser.

Monitor keyboard arm

Monitor keyboard arm

A bracket that can be mounted on both sides of the dispenser. The bracket can support different kind of pheriphiral equipment like a pc monitor, mouse, keyboard and a compact printer.

Monitor keyboard arm XL

Monitor keyboard arm XL

An enlarged bracket can be mounted on both sides of the dispenser. The bracket can support different kinds of peripheral equipment like a pc monitor, mouse, keyboard and a compact printer.

Roller conveyor

Roller conveyor

Ergonomic solution for heavy cans. Position the roller conveyer in line with the can table to load or unload cans.

Satellite overhang stand

Satellite overhang stand

Combined with our shakers, the overhang is placed beside the dispenser to support peripheral equipment.

Stand alone punch 46mm or 48mm

Stand alone punch 46mm or 48mm

External punching system.

Touchscreen arm

Touchscreen arm

To mount a touchscreen on the dispenser.

Ventilation interface adapter

Ventilation interface adapter

Connects your dispensers to an external air extraction system with an adapter that you fit into the ‘push-out hole’ of the machine’s rear panel.